Acroloop ACR 1500 Multi-Axis Controller

The ACR1500 is Acroloop Motion Control Systems’ new OEM 4-axis PC-Bus based controller. The ACR1500 is a PC-bus based card only and offers no serial or LPT ports as an option. It has the ability to run up to four servo loops with up to 4 encoders at 20MHz. It can optionally be equipped with 8 analog inputs through a 12 or 16 bit analog/digital converter, and introduce these inputs into the servoloop. Because of our modular design to our outputs, it is possible to have two axis of servo with two axis of stepper on the same controller or all of one type. Unlike the Acroloop family of controllers the ACR1500 utilizes a 16-bit bus, therefore, reducing cost dramatically. Until the ACR1500, this level of control had been typically double the price! Of course, all of Acroloop’s systems run on the same software and firmware, so the standard features and benefits apply to the ACR1500 as well.

The ACR1500 is Acroloop Motion Control Systems’ answer to affordable high performance control when low cost, real-time speed, and ease of programming are most needed.

ACR1500 Exclusives:

· 40 MHz Floating Point DSP.
· 4 Axes of Servo or Stepper.
· Up to 4 Encoders at 20 MHz.
· 128K User/System Memory.
· 48 TTL I/O with Industry Standard Opto22, 50 Pin Connector.
· Low Cost 16-bit Bus.
· Half Size ISA Size PC Bus Card.


Technical Documentation / Software

Acroloop ACR1500 Detailed Specs